Grand Brass Lamp Parts, LLCAnswer
Nov 13, 2023 - 06:16 AM
The process of wiring this socket is no different than the "normal" sockets you know.
Strip about 3/4 inch (1.9 cm) of insulation from the ends of the wires using a wire stripper
Use a wire hook terminal or simply Loop the wire around the screw terminal so that when the screw is turned closed, the hook will tighten the wire closed, not force it open. This means, essentially, that the wire should be looped around the screw terminal in a clockwise direction as you look down at the screw head from above
Strip about 3/4 inch (1.9 cm) of insulation from the ends of the wires using a wire stripper
Use a wire hook terminal or simply Loop the wire around the screw terminal so that when the screw is turned closed, the hook will tighten the wire closed, not force it open. This means, essentially, that the wire should be looped around the screw terminal in a clockwise direction as you look down at the screw head from above
